AC Low Temperature Blowing Agent (ACP-W)

Product Introduction

ACP-W foaming agent is used widely in the foaming of EVA, PE,PVC,natural rubber, synthetic rubbers, PVC+NBR blending and other materials. It is particularly suitable to the hot-pressing molding of EVA MD in large and small molds.

Characteristics

Foaming at low temperature               High Whiteness of final products

Stable foaming ratio                              Excellent elasticity of products

Application

The decomposing temperature of ACP-W is low, so no activator is needed to activate its decomposition. Lessen the using of foaming activator will not only reduce the cost, but avoid mottles produced. It is best fit for the production of pure white products. It could also save a large number of pigments while using in the colored products, and make the product brighter and more vivid.

The product will have fine bubble structure from using this foaming agent. The outstanding feature is that this foaming agent could produce whiter high quality EVA shoes material without affecting other physical performance of products.

It is suggested that this series of foaming agent should be used in lower mixed temperature and general sulfuration condition to avoid the uneven cellular, coarse cellular or other problems because of premature foamed.

In most cases, foaming activator is active oxidant, which will affects the excellent elasticity of polymer chains for EVA and other material. This series foaming agent is favor for the tensile and tearing strength of products, especially benefits to the elongation of products.

Technical Index

Chemical component: Azodicarbonamide                            Appearance: Yellow powder

Decomposing Temperature (°c): 135±2                                Gas Volume ml/g (STP): 140±5           

Particle size (μm): 12~14                       Ash: ≤0.3%                            Moisture: ≤0.3%

Package and Storage

Low-temperature foaming agent is odorless and non-toxic, with good storage stability. It won’t decompose under common temperature but should be kept in cool and dry place, away from hot steam pipeline, fire source and direct sunlight. Never let it contact directly with acids and alkalis. It is suggested that good ventilation conditions should be realized where the foaming agent is treated and mixed. Be careful not to inhale its powder, make frequent skin contact or swallow it.

Each 25kg of low-temperature foaming agent is packed in plastic lined bag, carton or barrel according to clients’ demand.

Each batch of this foaming agent series weighs 3 Tons. While using the foaming agent of same batch, only a handful is needed to test for confirmation and then the whole batch can be used with certainty.